Tag Archives: Ambidextrous

Battle Arms Development RACK Ambidextrous Charging Handle

Battle Arms Development recently announced their RACK Ambidextrous Charging Handle.  Here is the info on what to expect:

BATTLEARMS™ RACK Ambidextrous Charging Handle Founders Edition and Early Adopter Specials

Truly Original: The revolutionary new mechanism is unlike any other charging handle on the market. We are pleased to receive U.S. Utility Patent No. 9964371, 9810494, 9587896.

No Weak Roll Pins:  Even the best-designed products fail at their weakest point and we have taken the infamous roll pins out of the equation. The RACK™ was designed with no roll pins.

Smooth Sliding Latch:  Not another pivoting mechanism to wear out the upper receiver notch, this patented latch system slides parallel with the receiver notch for slick and quick release and simultaneously minimizes wear.

Asymmetric Charging:  Purpose built with asymmetric use in mind, the RACK™ will handle left or right side pulls with ease. Regardless of your charging handle racking technique, the RACK™ will perform with consistent and positive assurance.

Monolithic Modular Handle:  Machined from one single piece of aluminum, the RACK™ handle was designed with strength in mind. It is also key to the sliding latch and the positive and balanced pull of the charging handle.

MADE IN THE USAThe RACK™ is designed and engineered in the United States.  It is precision CNC machined from billet 7075 T6 Aircraft Grade Aluminum in our brand-new manufacturing facility in Henderson, Nevada.  Coated in a hard anodize black finish.

 

For more information, please visit the Battle Arms Web Page at:

https://www.battlearmsdevelopment.com/bad-rack-15

Mega Arms .308 Slide Lock Charging Handle Now Shipping

MEGA5024

Mega Arms recently announced that they are shipping their new MATEN/.308 SL4000 Slide Lock Ambi Charging Handle.  This ambidextrous charging handle is the big brother to the 5.56 version that has been out for a little while.  The Slide Lock does not require a latch to be pulled to release the charging handle and features what I believe to be the least amount of moving parts for any  charging handle, ambidextrous or not.

The Slide Lock is made from 7075-T651 Billet Aluminum with a black Nitrated latch and is compatible with any .308/Large Frame, Semi Auto Upper Receiver.

For more information, check out the Mega Arms webpage at:

http://www.megaarms.com/maten/maten-accessories/slide-lock-charging-handle-maten-308/

MSRP is $68.00.  Rainier Arms does not have it up on their page for sale quite yet, but keep an eye out for it to drop soon.

 

Next Level Armament NLX Charging Handle Review

Next Level Armament NLX223 Ambidextrous Charging Handle 001-1000

The Next Level Armament NLX223 Ambidextrous Charging Handle, made from 7075 aluminum, features two over-sized “ears” that provide a greater surface area to grab onto.

Due to the NLX223’s similar appearance to the AXTS Raptor Charging Handle, I opted to do a side-by-side comparison between the two.  (Note:  I only had one sample of the NLX223 and NLX308 for this review and multiple Raptors.  This review is only based on the sample received for the review.  Your experiences may vary.)

Next Level Armament NLX223 Ambidextrous Charging Handle 002-1000

At first glance, the NLX223 has a luster black finish while the Raptor has a dull black matte finish.  Both have white laser etched logos and writing on the top of the handle.  The NLX223 had minor visible tooling marks which do not appear to affect the functionality at all.

Next Level Armament NLX223 Ambidextrous Charging Handle 003-1000

The NLX223’s ambidextrous “ears” are larger than the Raptor’s and are evenly sized whereas the Raptor’s are both smaller and the (shooter’s) left side of the charging handle is smaller than the right.  Though this will come down to the shooter’s preference, I found that the NLX223’s large “ears”, particularly the left side, as I am a right handed shooter, tends to get caught on kit when slung across the chest.

Both the NLX223 and the Raptor provide similar ambidextrous functionality with two movable “ears” that can operate the charging handle from either side.  The NLX223 “ears” appear to operate in tandem, regardless which “ear” is pulled to the rear while the Raptor will only work in tandem when the right “ear” is pulled and the left operates alone when operated normally.

During operation of the NLX223 and the Raptor there is a noticeable difference between the smoothness of the two.  The Raptor provides a smooth and quiet operation while the NLX223  seemed to “bind” during operation and produced a minor “squeaking” noise when the right “ear” was used, but not as prominent the left.  During a fast “rack” of the charging handle, the squeaking is not readily noticeable.

During “racking” drills, the NLX223 caused some nominal marring on both the lower receiver (area above the buffer tube threads) and the area of the upper receiver where the charging handle slides in and out of.  This was caused by the inside bottom of both “ears” as there were mar marks on the charging handle as well.  This may or may not be a deal breaker for some.

NLX223-1-10001

NLX223-2-10001

The NLX223 is available for $80 from Next Level Armament.

Next Level Armament NLX223 and NLX308 Ambidextrous Charging Handles 001-1000

Next Level Armament also offers the big brother to the NLX223, the NLX308, which is designed for .308 AR’s.  Similar in design and functionality to the NLX223, the NLX308 is available for $90.

Next Level Armament NLX308 Ambidextrous Charging Handle 001-1000

 

http://www.nextlevelarms.com/

Coming Soon: Seekins Precision Ambi Selector

Recently posted to the Seekins Precision Facebook Page is the announcement of their soon to be released Ambidextrous Selector.

Seekins_Precision_Ambi
Photo by Crossfire

Here is what they have to say:

“Say hello to our little friend… The new Ambidextrous Safety Selector. Featuring both a 90 and 60 degree throw lever in an interchangeable and fully drop in design. Compatible with any mil-spec lower receiver and machined with aggressive diamond texture. The Seekins Precision ambi safety selector will be available in the coming weeks with an MSRP of just $39.99

As soon as I have some more information, I will make sure you know.

In the mean time, check out Seekins Precision’s Webpage for info on other quality products.

http://www.seekinsprecision.com/

New Mega Arms Ambi Charging Handle

Mega-Arms-Charging-Handle-2

Mega Arms just posted a teaser reference their new ambidextrous charging handle on Facebook.  Not a whole lot of information at this point, but they say that it has the fewest moving parts of any charging handle on the market.  I’ll post more information as I get it.

Click the link for the Facebook announcement:

https://www.facebook.com/MegaArms/posts/966123876737651

Mega-Arms-Charging-Handle

 

Mega-Arms-Charging-Handle-3

Build Breakdown #1

Periodically I will take one of my rifle builds and break down all of the parts used to build it.  If a part is not listed, such as an end plate, it is because it is a standard AR part that does not need mentioned if there is nothing overly special about it.  I will also do my best to give you a link to where you can  find the product for sale.

Mega Arms Billet Ambidextrous Lower Receiver and Megalithic Upper Receiver with Primary Arms PAC2.5x Optic 012-1000

 

Mega Arms Billet Ambidextrous Lower Receiver and Megalithic Upper Receiver 009-1000