Tag Archives: Billet

Master of Arms Announces the Esoteric15

The Following is a Press Release from Master of Arms:

San Luis Obispo, CA, November 9, 2016– Master of Arms announces the sleekest, no compromise AR-15 receiver produced. Through utilization of rigorous engineering and advanced machining, the Esoteric15 is now available.

_mg_7138
“We are extremely proud and excited to offer our product to the shooting sports, LE & Military community. We set out to build the absolutely best AR receiver in the industry. Our goal was to achieve an ultralight product without the cannibalization of traditional alloy materials or use of polymers. At the same time, we wanted our product to not only be extremely durable but to also have a clean, fast, low drag design. We have exceeded our expectations” – Nathan Lortz. CFC, Master of Arms

_mg_7299
Specifications: Lower

  • Precision CNC Machined from Billet 7075
  • Lightweight Design
  • Laser Engraved Logo
  • MIL-A-8625, Type III, Class 2, Hard Anodized Flat Black Finish
  • Compatible with TDP/Mil Standard AR Lower Receiver Parts
  • Dimensional Accuracy Inspection
  • All Sharp Edges De-Burred Sharp by Hand
  • Pictograph Selector Markings Properly Marked for 90° Safety Selectors
  • Receiver Safety Selector Hole & Internal Wall Machined with Relief Cut for SHORT-THROW Safety Selectors
  • Multi Caliber Marking for Build Versatility
  • Flared, Deep Beveled Magwell
  • Easy in Install Set Screw Bolt Catch Pin (Pin Included)
  • Captured Takedown Pin Detent Spring (Set Screw Included)
  • Upper/Lower Receiver Tension Screw (Screw included)
  • Integrated Trigger Guard
  • All Components, material, and packaging made in the USA
  • Weight: 6.85 oz.

Specifications Upper

  • Precision CNC Machined from Billet 7075
  • Lightweight Design
  • M4 Feed Ramps
  • Machined T-Marks
  • Laser Engraved Logos
  • MIL-A-8625F, Type III, Class 2, Hard Anodized Flat Black Finish
  • Compatible with TDP/Mil Standard AR Upper Receiver Parts
  • All Components, material, and packaging made in the USA
  • Weight: 5.5 ounces

For more information, please visit:  http://www.masterofarms.com

Cross Machine Tool Releases the UHP15-SSA AMBI Lower Receiver

Cross Machine Tool SSA ambi lower 3

Cross Machine Tool has released the new UHP15-SSA Lower Receiver.  SSA stands for “Smooth Side Ambi”, which features all of the standard Ambidextrous features of the UHP15A Lower Receiver without branding and logos present on the left side of the lower.

Cross Machine Tool SSA ambi lower 2
The purchaser can opt to have Cross Machine Tool to laser engrave a personalized SBR or Trust Information on the receiver.  The laser engraving is at a depth of .003″ which is in line with BATFE requirements and can be placed on either the right side of the receiver above the trigger pin hole or on the bottom of the trigger guard.

Cross Machine Tool SSA ambi lower 1

The 9.9 oz UHP-15SSA is CNC machined from 7075-T6 billet aluminum and is finished in Type III, Class II Anodized Black.  The UHP-15SSA features standard diameter trigger and hammer pin holes, “Safe” and “Fire” selector markings, an Integrally Machined Trigger Guard, a Flared Magwell that is compatible with USGI and PMAGs, an Upper Receiver Tensioning Screw and has a Bolt Catch Screw included.

Cross Machine Tool SSA ambi lower 4

The MSRP of the UHP15-SSA is $229.00, but is available at an Introductory Price of $199.00.  Engraving is an extra $30.

For more information, please visit:

http://www.cmttac.com/AR-15-Receivers/AR%2015%20CMT%20Billet%20Lower%20Receivers/UHP15SSA-SSA

New from Fortis Manufacturing

Fortis Manufacturing 5.56 12 inch SWITCH Rail 011-1000

Fortis Manufacturing has recently released two pieces of pure epicness; the Fortis Billet Upper Receiver and the 5.56mm SWITCH Rail, which is currently offered in the 12″ length.


 

FORTIS BILLET UPPER RECEIVER

Fortis Manufacturing Billet Upper Receiver 001-1000

Sticking with the sexy lines that Fortis has become known for, the Billet Upper Receiver is no different.  Not only has the design been amped up, the weight has been shaved down without loss of strength or rigidity in this upper machined from Billet 7075-T6 aluminum.

Fortis Manufacturing Billet Upper Receiver 005-1000

For more information, follow this link:

http://fortismfg.com/ar15-fortis-billet-upper-receiver


 

FORTIS SWITCH 556 RAIL SYSTEM

Fortis Manufacturing 5.56 12 inch SWITCH Rail 001-1000

The SWITCH Rail, which was originally reserved for the .308AR Platform, was expanded to the 5.56mm Platform after such a positive reaction.  This lightweight rail is by far the easiest rail install of all time, so much so, it is easier than replacing a set of stock plastic handguards.

Fortis Manufacturing 5.56 12 inch SWITCH Rail 002-1000

For more information, follow this link:

http://fortismfg.com/ar15-forits-swtich-556-rail-system-12

Fortis Manufacturing 5.56 12 inch SWITCH Rail 005-1000