Tag Archives: Glock

CMC Barrels™ Announces New Glock Precision Barrels

The following is a Press Release from CMC Barrels™

CMC_preview

CMC’s Match Precision Barrels are the ultimate upgrade drop in barrels for Gen 3 & 4 Glock® 17,19 and 34 Pistols. The Match Grade barrels are precision machined from Certified, DFARS compliant; prehardened 416R premium grade stainless steel, to extremely tight tolerances and exacting details. 416R stainless steel is recognized for its corrosion resistance, machinability and high tensile strength; it is the industry standard for premium Match Grade barrel manufacturing.

G17_T28_Blk_Int_001_preview

CMC’s propriety In house machining, production and Quality control inspection process’s allow us to attain an ultra-precise barrel with enhanced slide fit & lock up for improved accuracy.

G17_T28_Brnz_Int_001_preview

CMC’s barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully QC inspected, double honed (rough and finish) to produce the smoothest bore possible, with a Max Roughness Average (RA) of 12. Finished bore dimensions are held to +/ – 0.0005 “tolerance from nominal groove and bore dimensions but the dimensions are uniform to within 0.0002 for maximum consistency, accuracy and quality.

G17_T28_Brnz_Side_001_preview

SAAMI, Match Grade specification chambers, precision cut and finished to a maximum Roughness Average (RA) of 16.

G17_T28_Brnz_Top_001_preview

The pre-hardened 416R stainless steel is stress relieved to an exacting recipe after rifling and final hardness is 38-42 Rockwell C before final barrel profile machining is completed.

Barrels are bead blasted to create a satin finish prior to plating and are available in 3 finish options.

  • Stainless, uniform Satin Blast Finish with ultra- low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
  • Bronze TiCN, with ultra low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
  • Black DLC, with ultra low friction hBN (Hexagonal Boron Nitride) Bore & Chamber

G17_T28_Slvr_Int_001_preview

User friendly, CMC’s barrels are drop in; they do not require gunsmith assembly.

These are an affordable, ultra accurate, durable upgrade to your existing Glock® 17,19 or 34 factory barrel.

Barrels are available with and without suppressor threads in 1/2-28 TPI RH

CMC’s Barrels are straight fluted for aesthetic purposes 100% Manufactured in house, in The Great State of Texas.

  • Glock17, 19 Threaded Fluted MSRP $210.00 Approx
  • Glock 17, 19 Non Threaded Fluted MSRP $199.00 Approx

Delivery In stores December 2017

SHOT 2017 – CMC Triggers

CMC-Triggers

CMC Triggers has stepped outside of the box this year with their line of triggers dedicated for the AR platform of rifles and has entered into the Glock Trigger Market.

SHOT Show 2017 - CMC Triggers Glock Trigger 002-1000

The trigger, called the CMC Glock Trigger Gen 1, will be available around mid-March 2017 for a cost in the ballpark of $175.  The trigger will be available for both Gen 3 and Gen 4 Glocks, will offer a 5# trigger pull and will have the same trigger safety functionality as a standard Glock trigger.  One cannot mistake the unique look of the CMC flat trigger and it translates well over to the Glock trigger.

SHOT Show 2017 - CMC Triggers Glock Trigger 001-1000

For more information, please visit: http://www.cmctriggers.com/

SHOT Show 2017 – Grey Ghost Precision

Grey Ghost Precision

For 2017, Grey Ghost Precision had a lot to offer at SHOT Show.

GGP has your 9mm Glocks covered.  Starting off with GGP 9mm Barrels for the G19 and G17, both retail at $179.99.

SHOT Show 2017 - Grey Ghost Precision Glock G19 G17 Barrels-1000

Next up for the Glock is the GGP Glock Slide for the G19 and G17.

SHOT Show 2017 - Grey Ghost Precision Glock Slide 001-1000

The GGP Glock Slides will come either completely stripped (lacking all internal parts) or completely assembled.  There are models that offer a Trijicon RMR cutout or not.  The stripped slides start around $375 and the complete slides start around $475.

SHOT Show 2017 - Grey Ghost Precision Glock Slide 002-1000

GGP, in partnership with Kruger Optical, has two carbon fiber wrapped scopes that they have added to their inventory.

SHOT Show 2017 - Grey Ghost Precision CF-5 1-5x24 Scope-1000

The CF-5 Carbon Fiber Scope weighs in at 14.3 oz, is constructed of a carbon fiber frame, is water proof, offers shock resisstance (1000 cycles at 750g) and comes with a Limited Lifetime Warranty.  The scope is 1-5×24 with a 30mm tube, has an illuminated reticle and adjustments of 1/2 MOA per click.  The CF-5 is approximately $1249.99.

SHOT Show 2017 - Grey Ghost Precision 3-18x50 Scope-1000

The bigger brother of the CF-5 was delivered to the GGP crew this morning at the show.  It has yet to be named.  The scope’s magnification is 3-18x50mm, has an illuminated reticle and offers 0.1 MRAD adjustments per click.  This scope’s MSRP has yet to be determined.

Lastly, GGP introduced the Grey Ghost Precision Grim Rifle.

SHOT Show 2017 - Grey Ghost Precision Grim Rifle-1000

The Grim is chambered in 6.5 Creedmoor, is equipped with a 22″ SS Proof Research Barrel, has an 18″ Rail, ambidextrous bolt release, Superlative Arms adjustable gas block, Gen 3 Magpul PRS stock and comes standard with a CMC 2-Stage Flat or Curved Trigger.  The Grim will retail for approximately $3100.

For more information, please visit: http://www.greyghostprecision.com/

SilencerCo G19 Threaded Barrels – Now Available

Available for purchase now and will ship out on the 15th, SilencerCo now has added the Glock 19 to the list of available threaded barrels.

g17_THREADED_BARREL

The 416R Stainless Steel barrels feature a 1/2×28 Thread with a 1:10 RH Twist and is finished in Black Nitride.  The barrel retails for $220.00.

The models currently available are for the Glock 19, Glock 17 and Glock 21 with the Glock 17L, Glock 34, Sig Sauer P226, Springfield XD, and Smith & Wesson M&P versions to come out soon.

For more information visit SilencerCo.

Safariland Model 6360 ALS Holster Review

Safariland_ALS_007

I recently changed my duty holster over from a Safariland SSIII to the Safariland Model 6360-832 Holster.   After almost a decade of drawing a handgun from a SSIII holster and defeating the retention mechanisms one way, it took a few hundred drawing repetitions  to change my “muscle memory”.  The end result was well worth the efforts.  Unlike some other holsters that require the draw to take on varying angles and twists, the ALS holster’s draw is straight up after retention devices have been defeated.

Additionally, the draw from a seated position, especially in a patrol car, is much more effortless than with the SSIII, which requires the handgun being rocked to the rear a fraction of an inch to defeat a level of retention, which usually means pressing it into the seat back.

Safariland_ALS_003

A few of the benefits to note are the increased speed of the draw with the ALS compared to the SSIII as well as the security of conducting an immediate re-holster of the handgun.  With the SSIII I had to get at least one of the snaps fastened to semi-secure the handgun, while with the ALS all I was required to do was to “drop” the handgun back into the holster until it “clicked” or locked into a secure position, or as some would consider the first level of retention.

Safariland_ALS_008

The ALS holster is considered a Level III holster, though it is also available in a Level IV with the addition of an optional sentry installed.  As viewed in the photo above, the first level of retention is underneath the hood with a “thumb break”, the second level being the hood, and the third being the hood guard, which looks like a shield to the left of the hood as pictured.  The purpose of the hood guard is to help prevent a gun grab from the front of the individual wearing the holster.  Not all body shapes are the same and some officers have found the hood guard to be uncomfortable.  For them, we have installed a sentry as their third level of retention in lieu of the guard.

Safariland_ALS_005

The finish that I chose was the STX Plain Black and has held up fairly well over months of use and abuse.  There is one blemish that you can see on the bottom of the holster (pictured above), though in my honest opinion, it is just part of doing business.  The STX Plain Black finish has held up better than the previously issued SSIII holster’s finish from the holster that was initially issued to me a decade ago.

Safariland_ALS_002

Though in the above photo, the holster looks huge, I have not had any issues with the size of the holster.  Additionally, I know that some will make mention about the HSGI Extended Pistol Taco Pouch holding the ASP Baton being too close to the handgun, effecting the draw.  When worn, the holster and the baton pouch are spread out enough due to the curvature of my body and they do not interfere with one another.

Safariland_ALS_006

As seen from below, the light is not covered and the bottom of the holster is not sealed off.  I have had no problems with the light being damaged or even exposed to any hazards, however, with the opening, water and other minor debris cannot build up as it will drain out of the bottom of the holster.

For those who participate in NLTA (Non-Lethal Training Ammunition) Training (aka “Simunitions”), be mindful that the bottom of the interior of this holster has a “guide rod” that inserts into the barrel.  This “guide rod” is to maintain the handguns proper positioning and security inside the  holster when the light is not installed.  With the majority, if not all of the available “Sim Guns”, the barrel’s opening is off-set as not to allow live “real world” ammunition inadvertently being chambered and having the firing pin strike the primer of a live round.  That being said, the “guide rod” will not fit into the barrel of the “Sim Gun” and will not allow for a proper “seating” of the handgun in the holster.  This has never proven to be a deal breaker, but something to be mindful of when you cannot completely holster and secure your handgun during training.

Overall, I am extremely pleased with this holster and would highly recommend it to any Law Enforcement / Military / Security personnel that require a secure and fast means of carrying their handgun in hazardous environments.  The holster retails between $147-$217 depending on options.  This is a fair price to pay considering the value of being able to retain your handgun when it truly matters.

For more information, check out the Safariland webpage.

Multitasker Series 3 Multi-Tool Review

Multitasker logo

In the world of Multi-Tools and their use for weapons maintenance, especially the AR-15, nothing can hold a candle to the Multitasker® Tools brand, in particularly the Series 3.

Out of the box the difference can be clearly seen and especially felt. Other multi-tools that I have owned in the past have “rattled” and did not feel robust.  The Series 3 looks like and feels like a battle tank waiting to face whatever skirmish that can be thrown at it.

Series3-3

Though the weapon-specific design of the Series 3 will probably not serve you as well on a camping trip in the woods, it will however prove to be a great first resort for in-the-field weapons maintenance, adjustment needs, and basic armoring tasks when conventional armorers tools are not readily available.

Prior to opening the Series 3, one of the first things I noticed was the G10 scales used for the grips.  These grips are extremely slip-resistant without being uncomfortably abrasive.

Series3-4

To really feel how robust this tool truly is, all that needs to be done is to open the pliers and feel how precise the machining is.  The Aluminum-Bronze washers provide for smooth operation when opening the pliers while the tight tolerances create a positive pressure that ensures that the Series 3 will stay closed until it is intentionally opened.

I appreciate the feature that allows the accessory arms to be opened while the tool is fully closed, thus eliminating one step when needing to deploy one of the tool options.

Series3-2

The sharpened D2 tool steel blade firmly locks into place and does not offer any “wiggle room” once deployed.  The blade is extremely sharp, so remember not to leave this around your little ones.

The 3/32″ pin punch can be used to assist with difficult AR pivot and take-down pins and the removal and installation of the fire control group pins as well.  While it can be used to break down your Glock to an armorer level as well, Multitasker® recommends not using it to pry off the Glock magazine floor plates.  Common sense applies here as there can be too much side-wards pressure on the pin, causing it to snap or possibly damaging the threads holding the punch on.   The threads holding on the pin punch are sized at 8-32 (male threading) to work in conjunction with an OTIS Technology cleaning kit.

The magnetic 1/4″ bit driver comes with the AR15 front sight tool installed.  The magnet is strong enough to keep the bits from falling out, but not impossible to remove.  When the bit driver arm is closed with a bit installed, the grip housing ensures that the bit will not inadvertently fall out.

diagram
Nomenclature diagram courtesy of MultitaskerTools.com

The Series 3 consists of quality CNC machined pliers made from D2 tool steel, a 3/8″ and 1/2″ hex wrench, a dual lug castle nut spanner wrench and screwdriver, a 3/32″ pin punch with 8-32 male thread (OTIS cleaning kit compatible), a radiused tip carbon scraper, a 3″ D2 tool steel knife blade (plain or serrated), a 1/4″ magnetic bit driver with M16A2-style Front Sight Post adjuster and a removable pocket clip.  A bit carrier with commonly used hex bits are also included.

The only thing that I think that I would have like to have seen included with the Series 3 would be some sort of pouch or carrier that would allow for the tool and bit carrier to be carried together.  I can understand that many people will have their own preferences on how to carry their Series 3, but even the ability to purchase something specific to the Series 3 as an add-on accessory would be a nice option.

Series3-1

Overall, as an AR-15 enthusiast, armorer, and firearms instructor, I highly recommend this tool for anyone from the basic weekend shooter to the soldier on the battlefield.

If you are interested in purchasing a Series 3 Multitasker, there are plenty of industry locations that offer them for sale, just follow the link below:

WHERE TO BUY

For more information on Multitasker Tools, visit them on their WEBPAGE or find them on FACEBOOK  or INSTAGRAM.