Tag Archives: LanTac-USA

LanTac-USA announces the E-CTG9 Trigger for Glock

It appears that LanTac-USA is releasing a Glock Trigger at SHOT Show 2018 (Booth 20652).  There is not currently any information on their webpage, however, the following is a press release regarding the new trigger.


The following is a Press Release from LanTac-USA:

Precision Upgrade Trigger for Glock 17, 19 Gen 1-3 & Gen4 Pistols.

The Ultimate drop in trigger for your pistol, the E-CTG9™ trigger can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with our improved trigger spring kit so you can set the ultimate trigger pull on your handgun.

The trigger housing features our SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and re shaped to reduce friction and create a much smoother, lighter more consistent pull.

This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

Our Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard wearing surface that reduced friction and trigger pull interference as it operates against the connector and internally against the pistol frame.

The included spring kit comes with the following parts to assist in reducing trigger pull further.

x1 4.0Lb Firing Pin Spring (For Target, Competition & Sporting Use)

x1 6.0Lb Firing Pin Spring (For Carry & Self Defense Use)

X1 6.0Lb Increased Power Trigger Spring

x1 Reduced Power Firing Pin Safety Spring & Ultra Smooth Safety Plunger.

Springs are manufactured from the highest grade piano wire and tempered for the best service life.

Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

The Triggers Pivot Pin and Trigger Bar position has been carefully considered to deliver maximum leverage with minimum force and the hybrid bow face is a perfect blend of curved and flat surfacing that delivers comfort with improved ergonomics and finger positioning.

The bow is precision machined from certified 7075-T6 aluminum and hard coat anodized Type3 Class2 Black.

Triggers are assembled in house and come with our lifetime warranty against defects in manufacture.

MSRP $185.00

SHOT 2017 – Lantac-USA

LanTac

New for 2017 from LanTac-USA is the E-BCG (Enhanced Bolt Carrier Group) in .308 and the Dragon 5.56 BQM Muzzle Brake.

SHOT Show 2017 - LanTac-USA .308 E-BCG-1000

The .308 E-BCG is the bigger brother of the popular 5.56mm size BCG.  The E-BCG features a forward porting gas port and a smoothcam system.  The .308 E-BCG MSRP’s for $327.


SHOT Show 2017 - LanTac USA Dragon DGN556BQM -1000

The DGN556BQM, aka Dragon Muzzle Brake Quick Mount, is the same as the standard with the addition of lugs to accept the Gemtech Quick Mounted Suppressors.  It will retail for the same cost as the standard Dragon Muzzle Break at $125.

For more information, please visit: https://www.lantac-usa.com/

First 50 LANTAC LA-R15 Intermediate Raven Rifles to be Offered Exclusively at Cabela’s

The following is a Press Release from LanTac-USA and Cabela’s:

First ever shipment of new, state-of-the-art rifles available through Cabela’s July 7, 2016

banner1_no_url

FORT WORTH, Texas (July 7, 2016) – LANTAC™ USA LLC, Fort Worth TX., will make the first ever shipment of 50 of the company’s new LA-R15 14.5” Intermediate Raven™ rifles available exclusively at Cabela’s for a limited time beginning Thursday, July 7th. These highly anticipated sought after, state-of-the-art rifles will be offered through Cabela’s before they hit the market anywhere else in the world.

raven002A

LanTac’s LA-R15 14.5” Intermediate Raven is the first ever AR modern sporting rifle with the company’s patent-pending Adjustable Buffer System and proprietary buffer spring. Each rifle is comprised of premium parts and accessories, including hand-lapped, stainless steel barrels; billet 7075-T6 certified lower and upper receivers with Type III, Class II black anodizing; and LanTac’s UCT EXO NiB coated Enhanced Bolt Carrier Group (E-BCG™) with forward porting, flared tail carrier and Carpenter 158 bolts.

 

Additional features like the state-of-the-art, world-leading, pinned and welded LanTac DGN556B™ Dragon™ Muzzle Brake; a MPI tested bolt; and LanTac Curved Bow, CMC Triggers 3.5-lb, E-CT1™ single-stage drop-in trigger system, allow the LA-R15 14.5” Intermediate Raven to offer zero muzzle rise and a massive reduction in felt recoil, in a fast, flat-shooting and accurate rifle.

The LanTac LA-R15 14.5” Intermediate Raven rifle is manufactured to the highest quality standards and assembled by a skilled team of rifle builders. Each rifle is shot tested at LanTac’s facility, treated with FrogLube™ and comes with a lifetime warranty against defects. Visit www.lantac-usa.com for more information.

Cabela’s Incorporated is a leading specialty omni-channel retailer of hunting, fishing, camping, shooting sports and related outdoor merchandise and has long been recognized as the World’s Foremost Outfitter. Visit the LanTac page on Cabela’s website, or www.cabelas.com, for more information about Cabela’s exclusive offering of the new LanTac LA-R15 14.5” Intermediate Raven rifle.

LANTAC .308/7.62X51MM Enhanced Full Auto Style Bolt Carrier Group NiB Coated

The following is a Press Release from LanTac-USA:

LANTAC E-BCG™, Enhanced Bolt Carrier Group.

AR10 Full Auto Style for increased mass and lock time.
Our new BCG is precision machined from 8620 Steel with a 9310 Precision Hard Ground, Magnetically Particle Inspected Bolt.
The entire carrier assembly is NiB, Electroless Nickel Boron coated with the patented, advanced UCT EXO process, unlike standard NiB coatings.

LanTac 308 EBCG 001

This offers extreme lubricity with a friction coefficient of .02 and surface hardness of 82-85 Rockwell C.

The carriers patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier.

This results in a system that runs flatter with a smoother energy pulse.

LanTac 308 EBCG 002

In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.

The flared boss at the tail of the carrier enhances the BCG’s position within the buffer tube at the time of cycling and allows for a flatter more controlled reciprocation of the assembly.

LanTac 308 EBCG 003

All critical dimensions are hard turned / ground after heat treat.
All E-BCG’s feature the LANTAC CP-R360-H™ patent pending domed cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).

The ultra smooth head reduces wear within the upper receiver.
The BCG’s weight helps to increase lock time with smoother operation.

LanTac 308 EBCG 004

Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly.

The E-BCG’s forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.

LanTac 308 EBCG 005

However, it should be noted that the E-BCG™ is not a complete solution for this issue and all rifles are different. ‘Over Gassed’ guns will suffer to a larger extent from this problem.

LanTac 308 EBCG 006

Weight 1Lb 2.1oz
Forward Porting, Enlarged Vents.
Balanced flared boss.
8620 Carrier, Heat Treated, Hard Turned.
MPI 9310 Bolt, Hard Turned / Ground.
NiB UCT EXO Coating.
CP-R360-H Domed Cam Pin
Mil-Spec Gas Rings
Mil-Spec Staked Gas Key
Grade 8 Hardened Fasteners
All Hard Chrome surfaces are to MIL-STD-171 1.2.2.2
Lifetime Warranty.
Made in the USA

MSRP $345.00

Pre-Order now direct or through our Dealer/Distributor network

www.lantac-usa.com

Caw Caw….Pew Pew Pew – The Raven Is Coming!

The following is information from LanTac USA on their new LA-R15™ Raven™ Rifle.

1C6A8897_COMPA-1000

Lantac’s LA-R15™ Raven™ Rifle is manufactured to the highest quality standards and assembled by a skilled team of rifle builders. Each rifle is shot tested at our facility and comes with a lifetime warranty against defects.

With a massive specification out of the box the LA-R15 Raven rifle delivers exceptional performance and is ready to go without any modifications or upgrades.

1C6A8862_COMP-1000

Its proprietary buffer system (ABS) and E-BCG Bolt Carrier Group together with Intermediate or Midlength gas systems and a Dragon DGN556B brake delivery an incredible flat shooting experience with zero muzzle rise or recoil and massively reduced carrier and buffer felt recoil, all without the use of an adjustable gas block.

The 3.5LB Single Stage Trigger is manufactured by CMC and has one of the smoothest sear surfaces in the industry (1-2RMS), together with a very fast reset. This combination allows the user to deliver ultra fast shot strings with virtually zero knock back, making re-acquisition of the target from shot to shot incredibly easy.

1C6A8897_COMP-1000

The 416R Stainless Steel barrel is chambered in .223 Wylde with a 1:7 Twist Rate and features a precision machined 11° target crown. It is hand lapped after button rifling, before an enhanced corrosion resistant Melonite finish is applied. A Lantac GB750-S low profile gas block is utilised together with a nitrided gas tube that delivers reduced carbon build up and gas erosion.

The ultra smooth (16RMS), proprietory bore and radiused cam pin slot of the UAR upper receiver work with the Lantac E-BCG’s CP-R360 Domed Head campin and the NiB (Electroless Nickle Boron Coating) on the E-BCG has the lowest coefficient of friction available.

The lightweight low profile Spada-S 12.5’’ Handguard comes with our RES Rail Extensions System on the Midlength Rifle and both versions have a 1.5’’ Picatinny rail attachment with a longer 2’’ length available as an option.

A 45° Scout Light Mount and Rail Panel packs are also available. Panels are supplied in Black, Grey & Tan.

Furniture is supplied in the form of a Magpul CTR stock with .070’’ Enhanced Butt pad and MOE+ Rubber over moulded grip.

Comes complete with Instruction and maintenance booklet.

For more information, please visit: http://lantac-usa.com/

SHOT Show 2016 – CMC Triggers

CMC-Triggers

 

 

CMC Triggers AK47 Curved Trigger
CMC Triggers AK47 Curved Trigger

CMC Triggers, which was featured earlier in the Media Day coverage is seen everywhere at SHOT as they had sponsored the badge neck lanyards.  I had previously covered their AK-47 Trigger and had a chance to see all three profiles at the show.  The AK-47 Trigger is available in Flat, Curved and AK-Traditional Curve profiles and all three will be available for around $220.  The feel of these triggers are what would be expected with any CMC Trigger as they are smooth and crisp.

CMC Triggers AK47 Flat Trigger
CMC Triggers AK47 Flat Trigger
CMC Triggers AK47 Pattern Trigger
CMC Triggers AK47 Pattern Trigger

 

 

 

 

 

 

For more information, please visit: http://www.cmctriggers.com/

CMC Triggers LanTac-USA E-CT1 Trigger 001-1000s
CMC Triggers/LanTac-USA E-CT1 Flat Trigger
CMC Triggers LanTac-USA E-CT1 Trigger 002-1000s
CMC Triggers/LanTac-USA E-CT1 Flat and CurvedTriggers

Also available is a joint collaboration between CMC Triggers and LanTac-USA with  the E-CT1 Triggers that are available in both LanTac Flat and Curved profiles.

For more information, please visit: http://www.lantac-usa.com/

SHOT Show 2016 Media Day – LanTac-USA

I had the chance to check out Serial Number #1 of the new LanTac-USA RAVEN AR-15 today at Media Day.  The RAVEN will be available in two different barrel variations.

LanTac-USA Raven AR15 001-1000

The RAVEN features either a 14.5″ Intermediate Proof Research barrel, which is a joint collaboration with LanTac or a LanTac 416 Stainless Steel barrel, the SPADA Rail, a CMC/LanTac Curved Trigger, the LanTac Enhanced Bolt Carrier Group and an AXTS Ambidextrous Safety and Raptor Charging Handle.

LanTac-USA Raven AR15 002-1000

The cost with the Proof Research Barrel is under $4000 and with the 416 Stainless Barrel is approximately $2995.

 

LanTac-USA Raven AR15 004-1000

For more information, please visit: http://www.lantac-usa.com/

 

 

 

LanTac USA / CMC Triggers Design

LanTac USA and CMC Triggers have partnered up and created two new triggers that compliment both companies.  Neither LanTac nor CMC Triggers have created a product as of yet that I have not been thoroughly impressed with and happy to run in any AR-platform rifle.  I am excited to see how these triggers perform.  These triggers are available for pre-order (link at bottom of page).

The following is information from the LanTac USA webpage regarding the trigger specs.

3P5SCurved-1

This Tactical Trigger Group is a completely self contained, 100% drop-in fire control group upgrade for the AR-15, LR-308 and AR-10 rifles.

Building on the original Super Match design, the double patented Tactical Flat or Curved Trigger design yields truly remarkable and unprecedented trigger control, trigger feel and accuracy, while also retaining the rugged reliability of a Mil-Spec trigger group. Trigger pull is factory pre-set at 3 to 3-1/2 pounds, and is not user adjustable.

3P5SFlat-1

Fits most standard Mil-Spec lower receivers with .154″ diameter trigger and hammer pin holes.

Features LANTAC’s Patented Trigger Bow Design.

Will fit Smith & Wesson M&P 15-22 Rifles with the longer pin set that is available separately.

Made in the USA.

Mil/LE Discount available, please contact us for your discount code.

ITAR Notice:
This product is manufactured in the USA by LANTAC USA LLC for sale within the USA only.

Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

For more information, click “HERE“.

LanTac USA Dragon Muzzle Brake in 9mm

The LanTac USA Dragon Muzzle Brake in 9mm (DGN9MMB) is now available for Pre-Order on Revolvr.  Available for $124.99, the Dragon Muzzle Brake offers improved recoil management and muzzle rise for both semi-automatic and full-auto fire.

LanTac_USA_9mm

To Pre-Order, visit Revolver at:  http://www.revolvr.com/pre-order-9mm-lantac-dragon-muzzle-brake.html

For more information on LanTac USA, please visit: http://www.lantac-usa.com/