Tag Archives: Shadow Valley Weapons

Build Breakdown #4

San Tan Tactical Billet Ambi Lower with CMT UPR-3 Upper, Fortis RED, SWITCH Rail and Hammer Charging Handle, CMC Triggers Tactical Trigger and UCWRG Grip 23 003-1000

San Tan Tactical Billet Ambidextrous Lower Receiver

CMT Tactical UPUR-3 Slick Side Upper Receiver

Fortis Manufacturing 14″ Switch Rail

Fortis Manufacturing Hammer Charging Handle

Umbrella Corporation Grip 23

Mission First Tactical Battlelink Minimalist Stock

Trijicon TA31F ACOG Optic

Shadow Valley Weapons SVCOMP 556

CMC Triggers Single Stage Flat Trigger

Magpul FDE PMAG with Magpod

Magpul FDE MBUS

Umbrella Corporation Bolt Carrier Group

Seekins Precision Ambidextrous Safety Selector

Rainier Arms Low Profile Gas Block

San Tan Tactical Billet Ambi Lower with CMT UPR-3 Upper, Fortis SWITCH and Hammer Charging Handle, CMC Triggers Tactical Trigger and UCWRG Grip 23 005-1000

Shadow Valley Weapons SVCOMP 5.56

The Shadow Valley Weapons Comp, or SVCOMP 5.56, definitely stands out in appearance from other comps on the market today.

The SVCOMP 5.56 is sized for the .223/5.56 platform with a 1/2×28 TPI thread, an overall length of 2.25″ and a diameter of 0.850″.  The SVCOMP 5.56 is made out of 4142 Chromoly Steel with a magnesium phosphate finish.

Aside from the functionality of reducing recoil and eliminating muzzle rise, the SVCOMP 5.56 offers some additional features.

Shadow-Valley-Weapons-001

Photo courtesy of Shadow Valley Weapons.

The guys over at Shadow Valley Weapons claim that SVCOMP 5.56 offers zero muzzle rise….I was a little skeptical about “zero”, but was impressed with the below video:

 If you take a look at the photo at the top of the page you will notice that the 12 O’Clock position is void of any port holes.  This is to allow the flash to be directed away from the shooters line of sight as not to lose night vision or sight picture.

The SVCOMP 5.56 also features a glass break feature on the tip of the comp made from S7 Tool Steel.  Though some may criticize having a glass breaking feature on the bang end of a gun, if used in a controlled manner, while being cognizant of backstop, this should be a non-issue.  Though it is not for everyone, the feature is still there.  All firearms safety fundamentals should apply here.

Here is the glass breaking feature in use:

Lastly, the SVCOMP 5.56 offers a wire cutter feature where the comp itself acts as an indexing point and the fired bullet would actually be doing the cutting.  This is not something that should be done for the first time in a hostile environment.  This technique will take some time and ammo to get a hole large enough to fit through and the user needs to realize that metal fragments from the fence will likely become an additional projectile in an unknown direction, so use proper PPE, i.e. safety glasses, when doing this.

For more information, visit Shadow Valley Weapons at: http://www.shadowvalleyweapons.com/