Tag Archives: Trigger

CMC Triggers Launches its 9mm Pistol Caliber Carbine (PCC ) Single Stage Trigger

The following is a Press Release from CMC Triggers:


Fort Worth, Texas: Due to the rise in popularity of Pistol Caliber Carbine (PCC) rifles and after careful research and development, CMC Triggers has launched their own PCC Trigger. The CMC AR-15 / AR-10 9mm PCC Single Stage Drop-in Trigger, available in both “Classic” Curved Bow and CMC’s patented “Signature” Flat Bow, was designed with the highest caliber that one comes to expect from CMC Triggers.

The same CMC Trigger that has become respected for use in AR-15 and AR-10 style rifles can now be easily installed in PCC rifles. Previously, PCC rifles with a standard trigger installed had approximately a 50% trigger reset failure rate. CMC’s new PCC Trigger geometry design has overcome those earlier issues. The PCC Trigger’s hammer dimensions have been modified to facilitate the 9mm platform and ensure reliability with each pull of the trigger.The CMC Curved Trigger bow has an exceptionally smooth feel and ultra-clean break while the CMC Flat Trigger Bow renders a linear feel unsurpassed by any other trigger bow shape.

  • CMC AR-15 / AR-10 9mm PCC Single Stage Drop-in Trigger Features:
  • Single Stage Match Trigger
  • Ultra-crisp 3.5lb trigger pull with no creep prior to hammer release
  • Glass-smooth break with no feel of grittiness
  • Minimal lock time is designed into the assembly using controlled hammer weight and balance activated by a rocket wire hammer spring, assuring repeatable function with either commercial or military grade ammunition
  • Positive trigger reset allows a quick follow up shot on target
  • Trigger pull is factory pre-set and not user adjustable
  • Hand assembled, and hand tested
  • Totally self-contained one-piece assembly
  • Includes CMC Anti-Walk Pin Set
  • Fits MIL-SPEC AR-15 and AR-10 style rifles
  • Made from 8620 Alloy Steel and S7 Tool Steel with machined tolerances of +/– .001″
  • Trigger is easy to install following the instructions: follow link www.cmctriggers.com/installation-instructions

While PCC shooting has been around for a while, it has recently become popular for competition shooting. USPSA now allows the PCC to be used in matches. Carbines are easier to shoot fast, and easier to shoot accurately compared to handguns.  Many 3-Gun shooters have also found that shooting USPSA with a PCC is a good way to get rifle practice for 3-Gun.

CMC Triggers is the original maker and manufacturer of the Drop-in Trigger Group for the AR-15/10 rifle since 2003. CMC’s critical sear engagement surfaces have a propriety machining process that renders superior surface finish and dimensional control. As compared to their competition, the techniques used establish a 1-2 RMS surface finish as opposed to EDMing which leaves a pitty 32 RMS, compared to a mirror which is 0 RMS. CMC Triggers sear engagement overlap is six to eight times greater than their competitors. This provides a much safer trigger and enhances reliability.

All CMC products come with a Lifetime Warranty and are made in the U.S.A., CMC proudly designs all its products for Law Enforcement, Military and Civilian use.

For more information about CMC Triggers and all the products they offer please visit them at cmctriggers.com

LanTac-USA announces the E-CTG9 Trigger for Glock

It appears that LanTac-USA is releasing a Glock Trigger at SHOT Show 2018 (Booth 20652).  There is not currently any information on their webpage, however, the following is a press release regarding the new trigger.


The following is a Press Release from LanTac-USA:

Precision Upgrade Trigger for Glock 17, 19 Gen 1-3 & Gen4 Pistols.

The Ultimate drop in trigger for your pistol, the E-CTG9™ trigger can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with our improved trigger spring kit so you can set the ultimate trigger pull on your handgun.

The trigger housing features our SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and re shaped to reduce friction and create a much smoother, lighter more consistent pull.

This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

Our Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard wearing surface that reduced friction and trigger pull interference as it operates against the connector and internally against the pistol frame.

The included spring kit comes with the following parts to assist in reducing trigger pull further.

x1 4.0Lb Firing Pin Spring (For Target, Competition & Sporting Use)

x1 6.0Lb Firing Pin Spring (For Carry & Self Defense Use)

X1 6.0Lb Increased Power Trigger Spring

x1 Reduced Power Firing Pin Safety Spring & Ultra Smooth Safety Plunger.

Springs are manufactured from the highest grade piano wire and tempered for the best service life.

Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

The Triggers Pivot Pin and Trigger Bar position has been carefully considered to deliver maximum leverage with minimum force and the hybrid bow face is a perfect blend of curved and flat surfacing that delivers comfort with improved ergonomics and finger positioning.

The bow is precision machined from certified 7075-T6 aluminum and hard coat anodized Type3 Class2 Black.

Triggers are assembled in house and come with our lifetime warranty against defects in manufacture.

MSRP $185.00

SHOT 2017 – CMC Triggers

CMC-Triggers

CMC Triggers has stepped outside of the box this year with their line of triggers dedicated for the AR platform of rifles and has entered into the Glock Trigger Market.

SHOT Show 2017 - CMC Triggers Glock Trigger 002-1000

The trigger, called the CMC Glock Trigger Gen 1, will be available around mid-March 2017 for a cost in the ballpark of $175.  The trigger will be available for both Gen 3 and Gen 4 Glocks, will offer a 5# trigger pull and will have the same trigger safety functionality as a standard Glock trigger.  One cannot mistake the unique look of the CMC flat trigger and it translates well over to the Glock trigger.

SHOT Show 2017 - CMC Triggers Glock Trigger 001-1000

For more information, please visit: http://www.cmctriggers.com/

SHOT Show 2016 Media Day – CMC Triggers

CMC Triggers showed off their new AK-Trigger at Media Day.  The AK-Trigger is offered in three profiles, Flat, Curved, or AK-Traditional Curved.

CMC Triggers AK Trigger 001-1000

The AK-Trigger is a true Drop-In Trigger with no adjustments needed due to varying pin locations.  The sear engagements are 1-2 RMS (machine finish), with 0 being a mirror finish.

The CMC AK-Trigger will MSRP around $220 for all three profiles.

For more information, please visit:  http://www.cmctriggers.com/

LanTac USA / CMC Triggers Design

LanTac USA and CMC Triggers have partnered up and created two new triggers that compliment both companies.  Neither LanTac nor CMC Triggers have created a product as of yet that I have not been thoroughly impressed with and happy to run in any AR-platform rifle.  I am excited to see how these triggers perform.  These triggers are available for pre-order (link at bottom of page).

The following is information from the LanTac USA webpage regarding the trigger specs.

3P5SCurved-1

This Tactical Trigger Group is a completely self contained, 100% drop-in fire control group upgrade for the AR-15, LR-308 and AR-10 rifles.

Building on the original Super Match design, the double patented Tactical Flat or Curved Trigger design yields truly remarkable and unprecedented trigger control, trigger feel and accuracy, while also retaining the rugged reliability of a Mil-Spec trigger group. Trigger pull is factory pre-set at 3 to 3-1/2 pounds, and is not user adjustable.

3P5SFlat-1

Fits most standard Mil-Spec lower receivers with .154″ diameter trigger and hammer pin holes.

Features LANTAC’s Patented Trigger Bow Design.

Will fit Smith & Wesson M&P 15-22 Rifles with the longer pin set that is available separately.

Made in the USA.

Mil/LE Discount available, please contact us for your discount code.

ITAR Notice:
This product is manufactured in the USA by LANTAC USA LLC for sale within the USA only.

Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

For more information, click “HERE“.

SHOT Show 2014 – Tactical Fire Control

IMG_0817-1000
TAC-CON 3MR Trigger

TAC-CON has introduced a new three-mode drop-in AR trigger for 2014, which is a non-NFA part and has received the blessing of the ATF.  The three selector positions for this trigger are Safe, Match-Grade Semi-Automatic, and TAC-CON 3rd Mode of Operation.

The TAC-CON 3MR Trigger System requires a pull of the trigger for each round fired and is not a “bump-fire” or fully-automatic system.  The 3rd Mode of Operation is achieved by the trigger resetting just as the casing is being ejected and the bolt is still moving rearward, creating an assisted reset.  The 3rd Mode trigger reset is approximately half the distance of the semi-automatic reset. The 3MR Trigger retails for $495.00.

For more information visit, http://tacfirecon.com/.